Djembe - budget - 3" diameter, 15cm high - painted

Just 4 inches high and supplied with a free wooden drumstick, this is a working drum and not a toy. The decorative painting, inspired by Australian aboriginal art, is all done by hand so every drum is different.

Even though it is so small, it makes a surprisingly good sound.

It is really good for young children because it can be handled easily and carried around. Being small it makes a higher sound than all the rest of our djembes so is a useful addition to a djembe collection.

6+ Month
CodeRRPEdu Price
AD-djbup0315 £5.00   £3.50

More information, images, videos and links...

More about the Djembe - budget - 3" diameter, 15cm high - painted

The easiest way is to hold it in one hand and hit it using the flat of your other hand.

Very young children will also want to stand the djembe on the floor and hit it with their hands. This makes a more dampened sound. Think of the hole in the bottom of the djembe as its mouth - that's where most of the sound comes out.

You can also use a small beater or two as long as you don't hit it too hard. It's also ideal for using fingers to tap out rhythms.

It can be played with the wooden drumstick supplied free with each drum. Coffee stirrers from coffee shops also work well, as will any lightweight stick. When using your fingers it's best to flick them quickly, so that they just touch the skin for an instant before bouncing off again.

What's included

What else to say? This makes a great little present even for big drummers!

What goes well with the Djembe - budget - 3" diameter, 15cm high - painted

Drums go well with all sorts of instruments as they're great for setting the basic pulse which the other instruments respond to. Try this with the egg shakers, the pad shakers or pretty well any percussion instrument. Because the drum is so small and can'

How the Djembe - budget - 3" diameter, 15cm high - painted is made

The same steps are used to make a mini djembe like this as for a full-size professional one. First of all take a piece of wood - a bit of waste mahogany left over from furniture production in this case. Second, carve the outside djembe shape, hollow out the inside using a lathe and then shape the edge of the top by hand. Third, weld 3 strong metal rings around the waist and top of the djembe, ready for taking the stringing. Fourth, cut a piece of tanned goatskin to fit the drum head and position it so that the top metal ring goes over it. Fifth using traditional stringing techniques between the three metal rings, increase the tension of the goatskin unitl itt produces a satisfying note. Sixth decorate the djembe with safe water-based paints and colourful aboriginal designs. Finally carefully finish all the edges to make sure there are no splinters or sharp edges.

How to look after the Djembe - budget - 3" diameter, 15cm high - painted

Nothing much to do to look after these mini djembes but be sure not to let the skin get damp as it will lose its tension and when the tension goes, so does the sound. If you do have an accident you can always try using a hair dryer to warm up and tighten the skin – or put it in the sun for twenty minutes and it will soon dry out.